High Speed 4 Colors Corrugated Box Printing Machine Whith Stacker
Corrugated Box Printing Machine Description
Die Cutting Unit
1. The plate roll and pad roller are made of high quality steel,
and the surface is polished and plated with hard chrome. Static and
dynamic balance correction, good running stability.
2. Pneumatically controlled die gap and automatic detachment die
cutter device to protect the rubber pad and prolong the service
life of the rubber pad.
3. The rubber roller is equipped with a mechanical cam type lateral
58mm swimming device to extend the rubber pad.
Life expectancy.
4. Phase adjustment device (inner planetary gear structure, large
torque, small transmission gap, 8-9 tooth teeth at the same time,
each gear tooth load is extremely light, so the mechanical wear of
the gear is very small, and the transmission accuracy is maintained
for a long time. Extend the service life.) Special products.
5. The die-cut phase is controlled by text display, which can
realize electric digital 360-degree adjustment, and can be adjusted
accurately (running and stopping).
The speed difference compensation device can control the linear
speed of the surface of the rubber pad roller (the outer diameter
of the rubber pad is continuously reduced during use). The
compensation device can make the linear speed of the rubber roller
roller completely controlled.
Auto Stacker part :
1, the paper arm can be manuallu y or automatically operated, with
insurance institutions to prevent the paper arm suddenly fall, to
ensure the safety of operators.
2, bed lift strong chain driven.
3, stack height 1600mm.
4, bed with the cardboard heap height automatically adjust the tilt
height, lift motor, with brake function, bed to keep a fixed
position will not decline.
5, then appropriate to widen the cardboard.
Auto vibrator part :
This machine is match equipment with middle and high speed rotary
die cutter machine,it structure easy ,operation convenient , waster
paper clearance effect well , economic, during the course of the
working ,reduced the worker force , that is ideal equipment of the
carton industry.
This machine include the paper feed part , collect waste paper part
,and walk lock system
paper feed part : that is transmit roller with PU round belt made
of the paper feeding , during the paper feeding, there have two
vibration rod , let the board vibrate on the belt , so get the
result of clear the waste paper .
Waste paper collect part : this part is the let the waste paper
feed out belt ,then use other belt feed the paper to side of the
machine , finished the collect waste and feed waste paper .
Walk locking part : there include four guide wheel ,let the machine
depart and lock with the rotary die cutter , operate easy , lock
part have pneumatic and lock cylinder ,let it with rotary die
cutter fix.
Corrugated Box Printing Machine Specifications
| Project unit type | 950*1950mm |
| Wall panel inside width mm | 950*1950mm |
| Maximum paper area mm | 950*1950mm |
| Minimum paper area mm | 360*640mm for slotter box Any size for die cutter box |
| Effective printing mm | 950*1950mm |
| Printing plate thickness mm | 3-8 |
| Maximum speed Sheets/min | 180 |
| Economic speed Sheets/min | 140-150 |
| Main motor power KW | 4.0 |
| Color registration accuracy mm | Four-color ±1 |
| Slotting accuracy mm | ±1.5 |
| Wall panel thickness mm | 40 |
