mall express package corrugated carton box multi color printer
slotter diecutter
1, machine clutch
1.The electric control machine is equipped with an alarm bell, and
the bell is continuously ringed during the journey to ensure the
safety of the workers.
2.pneumatic interlocking device.
3.The main motor adopts frequency conversion motor, frequency
conversion control, energy saving, stable start, and motor start
protection device.
2, leading edge roller feeding system
1.suction auxiliary paper feeding, - according to different bending
conditions of the paperboard, the air volume can be adjusted to
ensure smooth paper feeding.
2.the paper is lifted and the paper is driven by the cylinder,
which is quick and labor-saving.
3.Adopt the leading edge roller feeding system.
4. the side baffle and the rear baffle position are electrically
adjusted; the front baffle gap is manually adjusted.
5.Separate sheet feeding device (Continuous or sheet feeding can be
selected as needed).
6. paper feed counter, set and display the production quantity. 3,
dust removal device (optional)
(1) The paper brush dust removal device can remove impurities from
the printing surface of the paperboard in a large amount and
improve the printing quality.
4, paper feed roller
(1) The outer diameter of the upper roller is φ100 mm.
2), high quality seamless steel, wrapped with wear-resistant
rubber, and balance correction.(3) , the lower roller φ124mm
embossed hard chrome plated, and balance correction.(4) , the paper
feed roller clearance dial is manually adjusted, the adjustment
range is 0-12mm.
5, automatic zero device
(1) The paper feed unit, the printing unit, and the slotted unit
are electrically reset to zero.(2) , the general carton uses the
automatic zeroing device, the test prints two can be adjusted to
the correct position, reducing paperboard waste.
Host control; the motor image represents the state of the main
motor switch, the current speed is displayed above,
The fixed speed is the set speed. When the host is stopped, fill in
the number and open the host.
The machine runs according to the set speed. There are two kinds of
[feeding mode] [continuous], click to send
Paper mode for conversion, count control; for production paper
count, real count = setting
Alarm after quantity
Baffle control; left and right, up and down manual adjustment
mall express package corrugated carton box multi color printer
slotter diecutter
mall express package corrugated carton box multi color printer
slotter diecutter
| Project unit type | 2000 |
| Wall panel inside width mm | 2000 |
| Maximum paper area mm | 1900x950 |
| Minimum paper area mm | 450x220 |
| Effective printing mm | 1700x950 |
| Printing plate thickness mm | 3-8 |
| Maximum speed Sheets/min | 180 |
| Economic speed Sheets/min | 150 |
| Main motor power KW | 4.0 |
| Color registration accuracy mm | two-color ±1 |
| Slotting accuracy mm | ±1.5 |
| Wall panel thickness mm | 30 |
| Sheet feed mm | 1900x1000 |
mall express package corrugated carton box multi color printer
slotter diecutter
