Automatic Carton Corrugated Box Printing Machine Multi Colors Box
Making Machine
Printing department
1.Printing roller
1) the outer diameter :400mm,
2) the steel tube surface grinding , hard chrome plating.
3) do balance correction, steady operation.
4) ratchet fixed volume edition axis.
5)full Plate Hanging plate slot, suitable for 9 mm plate of the
article.
6) loading and unloading of the print plate , pedal switch of
electric control forward and reversing.
2.The printing press roller
1) the outer diameter :156 mm.
2) the steel tube surface grinding , hard chrome plating.
3) do balance correction, steady operation.
4)the printing press roller gap dial manual adjustment,
adjustment range 0-12 mm .
3. Feeder paper up and down roller .
1) up roller, the outer diameter of:86 mm, thick wall steel pipe,
with four feeder paper roller.
2)down roller,the outer diameter: 156 mm, thick wall steel
pipe, surface grinding, hard chromium plating.
3) paper roller gap dial manual adjustment, adjustment range
0-12 mm.
2.Steel anilox roller:
1) the outer diameter : 176 mm (mesh number: 200, 220
240, 220). (mesh optional)
2) steel pipe surface grinding, suppress anilox, hard chromium
plating.
3) do balance correction, smooth and steady operation, lattice
point is consistent, uniform inking.
4) anilox roller wedge type overrunning clutch, distributing, wash
ink is convenient swift.
5) Anilox gap dial manually adjust.
5. Ceramic anilox roller (optional)
1) outside diameter is :176 mm.
2) steel tube surface coating ceramic grinding, laser
engravinganilox.
3) anilox mesh for 260, 280, 320, 280. (mesh optional)
4) than steel anilox roller printing meticulously, wear-resisting,
long service life.
6. Rubber roller:
1)Outer diameter is : 164 mm.
2) steel pipe surface parcel wear-resisting rubber, and do
correction balance.
3) rubber middle high is the special grinding, ink transfer effect
is good.
4) rubber hardness is: 60-65 degrees.
7. Phase adjustment mechanism:
1) planetary gear structure.
2) printing phase electric digital 360 degrees adjustment (motion
and stop all can be adjusted).
3) manually adjust the horizontal position, adjust the distance ±10
mm. (optional electric adjustment, the computer control).
8. Ink circulation
1) pneumatic diaphragm pump, ink stability, convenient operation
and maintenance.
2) ink filter, filtering impurities.
9. Printing phase fixing device
1) cylinder type brake 9, printing phase fixing device.
2) when the machine separate adjustment phase, the brake
institutions limit the machine running, keeping the original gear
fixed point position.
10. Ink device:
1) mechanical oil pump (double oil pump , oil supply loop)
2) circulation oil, gear inking amount evenly, each group of oil
level balance.
| Size | 2400mm(width) |
| Roller diameter | 400mm (roller) |
| Max feeder paper size | 1200x2200 |
Min feeder paper size | 280x650 |
| Max printing area | 1200x2000 |
| Design speed (pcs/min ) | 100 |
Economic speed ( pcs/min ) | 80 |
| Standard printing block thickness | 7mm |
| Main motor | 7.5kw |
| Air pump power | 7.5kw |
3.machine picture:
